1
SONY / Re: Sony KLV-32EX330 main 1-887-041-32 dump bin bios eeprom firmware flash SPI
« em: Novembro 21, 2024, 08:01:29 pm »
Thanks sir, it's working, but TV language apperas Vietnam, is this info hidden into eeprom?
Centro de informação técnica.
Notícias:
Mostrar Mensagens
Esta secção permite-lhe ver todas as mensagens colocadas por este membro. De realçar que apenas pode ver as mensagens colocadas em zonas em que você tem acesso.
Páginas: [1] 2
2
OUTRAS MARCAS / Re: Sunny SN40DIL130216 HK.T.RT2841P631 Update firmware atualização software USB
« em: Agosto 18, 2024, 10:43:58 am »
Dear admin check the link please.
3
SUPRA / Re: Supra STV-LC32T500WL main TP.SIS231.PT71 dump bin bios eeprom firmware flash SPI
« em: Março 20, 2024, 05:24:25 pm »
it's V1N09 version, checked - working 
4
SONY / Re: Sony KDL-42EX410 dump bin memoria eeprom firmware flash
« em: Dezembro 20, 2023, 02:55:33 pm »
Hello sir, the same model and the same main, I read EEPROM from my problematic board from U13 M24128 and it's exactly 16kB, your EEPROM is 256 byte. Where you read this 256 bytes from? Whic IC? This is not EEPROM I think, do you have any other file on this model, please?
The problem with TV was continuous restarts after logo, every 10 seconds, After I tryed your NAND dump on this TV, now it's not even turning on, then I wrote original firmware and the same - it's now not even turning on.
The problem with TV was continuous restarts after logo, every 10 seconds, After I tryed your NAND dump on this TV, now it's not even turning on, then I wrote original firmware and the same - it's now not even turning on.
5
SONY / Re: Sony KDL-42EX410 main 32_MT66_EU_IP_MB dump bin nand flash firmware
« em: Dezembro 11, 2023, 11:44:34 pm »
Nice, thank you sir
6
SONY / Re: Sony KDL-42EX410 main 32_MT66_EU_IP_MB dump bin nand flash firmware
« em: Dezembro 11, 2023, 10:04:33 pm »
Hello dear admin, the link is not working, could you please fix it?
7
OUTRAS MARCAS / Re: Sunny SN49DLK27-0216 main HK.T.RT2841P831 Update firmware USB software
« em: Novembro 30, 2023, 12:28:03 am »
You are the best our admin Xeontec 
8
TOSHIBA / Re: Toshiba 50L5550VT upgrade software de atualização via USB
« em: Novembro 15, 2023, 02:07:14 pm »
Hello dear admin, the link is no working, could you fix it please? 
9
TOSHIBA / Re: Toshiba 49L5660EA firmware update software atualização USB
« em: Novembro 10, 2023, 10:01:44 am »
Sir How do I run this update? What combination should I press in order to run this?
10
TOSHIBA / Re: Toshiba 49L5660EA firmware update software atualização USB
« em: Novembro 07, 2023, 06:05:36 pm »
I have 5.93V on USB instead of 5V.
Fixed that, now it's 5.14V, changed FB resistors, 4.7k has 27k resistance.
Fixed that, now it's 5.14V, changed FB resistors, 4.7k has 27k resistance.
11
TOSHIBA / Re: Toshiba 49L5660EA firmware update software atualização USB
« em: Novembro 06, 2023, 06:28:18 pm »
Thanks will try this out. Do you have any recommendations considering this worst TV platform in the world - Vestel ? I know they are very problematic, and I never had a success with repairing any Vestel.
12
TOSHIBA / Re: Toshiba 49L5660EA firmware update software atualização USB
« em: Novembro 06, 2023, 11:59:15 am »
Hello our dear admin, this link is not working, could you please fix? 
If this will take a long time could you please give me a direct link for download? I need this ASAP, client will not wait more then several hours
If this will take a long time could you please give me a direct link for download? I need this ASAP, client will not wait more then several hours
13
HISENSE / Re: Hisense 32B6600PA main TP.MS6683T.PB732 dump bin EMMC firmware
« em: Agosto 14, 2023, 09:56:12 pm »
Hello dear admin, will it fit to? Or could you help me with this one please?
32B6700HA_TP.MS6683T.PB758_JHD315V1H73-T0
32B6700HA_TP.MS6683T.PB758_JHD315V1H73-T0
14
SAMSUNG / Re: Samsung UE40D5500RW main BN41-01660B dump bin nand flash firmware
« em: Julho 25, 2023, 08:24:34 pm »
I set 1k resistor, but there is no changes. Also I looked into photoes, when this TV comes to me from another master and there was no resistor in that position. But I write dump into NAND and TV was working 2 days. After that I get TV back and flashed agin, then I put USB firmware and press upgrade, after that TV is always restating. Could there be a problem with SPI or Onenand?
That resistor is connected to pin 16 CLE, how TV could worj without it 2 days?
Also I think SPI is not touched in this chassis during USB flash. About Onenand - I don't know.
That resistor is connected to pin 16 CLE, how TV could worj without it 2 days?
Also I think SPI is not touched in this chassis during USB flash. About Onenand - I don't know.
15
SAMSUNG / Re: Samsung UE40D5500RW main BN41-01660B dump bin nand flash firmware
« em: Julho 25, 2023, 05:34:29 pm »
I tried this dump on 3 different NANDs for UE40D5500RW with BN41-01660A main and it's not working
(edited) on by board there is absent ZR1312 resistor. In photo from google I see that it must be.
(edited) on by board there is absent ZR1312 resistor. In photo from google I see that it must be.
16
HISENSE / Re: Hisense 320AP02 main RSAG7.820.1637 dump bin bios eeprom firmware flash SPI
« em: Julho 13, 2023, 10:35:15 am »
Really, there where 2 leak solders between legs! It's working now, after 1.5 months
17
HISENSE / Re: Hisense 320AP02 main RSAG7.820.1637 dump bin bios eeprom firmware flash SPI
« em: Julho 12, 2023, 11:52:33 am »
Hello dear friend! After new CPU I have red artifacts, could this be because of non-contact on the CPU ground pad? I have changed this CPU with preheating board to 100 Celsius, also used low temp solder.
18
SAMSUNG / Re: Samsung UE40D5500RW main BN41-01660B dump bin nand flash firmware
« em: Junho 22, 2023, 02:22:58 pm »
hello dear admin, do you know what is the difference between BN41-01660A and this B ? Will it fit?
19
HISENSE / Re: Hisense 320AP02 main RSAG7.820.1637 dump bin bios eeprom firmware flash SPI
« em: Junho 14, 2023, 06:38:36 pm »
I measured the resistance, on N2 (new TV) it's 112R on line 1.2V, and 35R in N2 (old TV), I also measured this with desoldered SPi and EEPROM - the same. Also measured some transistors and resistors on that 1.2V line - all is ok. So I think, it's the CPU issue, which is semi-died because of high ripples from bad caps. On new TV I only have bad firmware because of the same bad caps. Will test new TV 1 day before say goodbay to it.
20
HISENSE / Re: Hisense 320AP02 main RSAG7.820.1637 dump bin bios eeprom firmware flash SPI
« em: Junho 14, 2023, 06:25:34 pm »
No, only TV N1, TV N2 was not working. But N2 is working now, after changing caps and with this SPI from your site sir "Hisence LCD32V88 main RSAG7.820.1637" .
I tried the same with N1 - nothing changed. I also noticed that there is 0.516V on +1.2V in TV N2, and 0.044V dropoff in TV N1, in other worlds, in N1 we have very low resistance on line 1.2V and a lot of consumption and as I understand this voltage goes into CPU, because when I am heating CPU - resistance on that line goes lower, heating other components - makes no changes. So now I need to wait new CPU and try it on N1 TV.
.I tried the same with N1 - nothing changed. I also noticed that there is 0.516V on +1.2V in TV N2, and 0.044V dropoff in TV N1, in other worlds, in N1 we have very low resistance on line 1.2V and a lot of consumption and as I understand this voltage goes into CPU, because when I am heating CPU - resistance on that line goes lower, heating other components - makes no changes. So now I need to wait new CPU and try it on N1 TV.
Páginas: [1] 2